Designed for short-to-medium ranges, the Armasight CO-MINI is the most compact commercially available Clip-On Night Vision Device. The CO-MINI uses image intensification technology and is designed to convert most low-to-mid power daytime sights, scopes, or binoculars to operate at night. The CO-MINI can be mounted in seconds and without tools. It can be attached in front of a day rifle scope (using its quick release Picatinny mount) or directly onto the day scope (or binocular/ telescope) objective lens with the included adaptor. Suitable for use with most commercial and military specification day time sights, telescopes or binoculars (up to 6Xx magnification). Because the CO-mini is mounted in front of your own day scope, the shooters eye relief is not altered, and shot release and follow through all remain intuitive. The clip-on device is factory bore-sighted to better than 1MOA accuracy, so no alteration in zero is experienced, and it really is as simple as mount and shoot, just as in day time.
The Armasight CO-MINI is intended primarily for use by the most demanding hunter or short range assaulter, where field of view and ease of use is more important than high magnification. Packed with innovative and important features – variable gain control, bright light shut-off, wireless remote control are just a few – the Armasight CO-MINI is designed to make quick intuitive shooting just as easy at night as it is during the day. Whether your day scope is a well known brand or not, the Armasight CO-MINI will work just as well at magnifications 2-6x. Available in a variety of high performing Gen 2+ and Gen 3 image tube options to cater for all budgets, the CO-MINI brings high quality clip-on night vision within everyone’s reach.
- Simple and quick conversion of daytime to night vision
- Mounts in front of any daytime scope, no re-zeroing required
- Equipped with wireless remote control
- Low battery and bright light
- Variable Brightness Control
- Quick release mount
- Mil Standard Compliant
- Limited Two-Year Warranty
- Generation - 2+
- Magnification - 1x
- Exit pupil - 21 mm
- 80 mm F 1.2 lens system
- Resolution - 45-51 lp/mm
- Field of view - 12.6°
- Power supply - 1 x 3V(CR123A)
- Operating temperature - -40 to +50° C
- Battery life - 60 hours
- Dimensions - 5.9" x 4" x 2.8"
- Weight- 1.5 lbs
- Warranty - 2 Years
What do the different types of generation mean?
A Night Vision Device can be either a 1st, 2nd, 3rd or 4th generation unit. What this stands for is what type of image intensifier tube is used for that particular device; the image intensifier tube is the heart and soul of a night vision unit.
1st generation is currently the most popular type of night vision in the world. Utilizing the basic principles described earlier, a 1st generation unit will amplify the existing light several thousand times letting you clearly see in the dark. These units provide a bright and sharp image at a low cost, which is perfect, whether you are boating, observing wildlife, or providing security for your home. You may notice the following when you are looking through a 1st generation unit.
- A slight high-pitched whine when the unit is on.
- The image you see may be slightly blurry around the edges. This is known as Geometric Distortion.
- When you turn a 1st Gen. unit off it may glow green for some time.
- These are inherent characteristics of a 1st Gen. unit and are normal.
2nd generation is primarily used by law enforcement or for professional applications. This is because the cost of a 2nd Gen. unit is approximately $500.00 to $1000.00 more then a 1st Gen. The main difference between a 1st and a 2nd generation unit is the addition of a micro-channel plate, commonly referred to as a MCP. The MCP works as an electron amplifier and is placed directly behind the photocathode. The MCP consists of millions of short parallel glass tubes. When the electrons pass through these short tubes, thousands more electrons are released. This extra process allows 2nd generation units to amplify the light many more times then 1st generation giving you a brighter and sharper image.
2nd Generation Features:
- Photo Cathode type: Multi-Alkali
- Resolution from 40 to 45 lp/mm
- Signal-to-Noise Ratio from 12 to 20
- 5,000+ hour tube life
3rd generation image intensifier tubes are of the highest quality. They have a micro channel plate, GaAs photocathode, and a completely self-contained integral high-voltage power supply. These 3rd Generation tubes provide a combined increase in resolution, signal to noise and photosensitivity over tubes with a multi-alkali photocathode. Generation 3 is the standard for the USA military.
3rd Generation Features:
- Photo Cathode type: Gallium Arsenide
- Resolution 64 lp/mm
- Signal-to-Noise Ratio 22 Typical
- 10,000-hour tube life
4TH GENERATION represents the biggest technological breakthrough in image intensification of the past 10 years. By removing the ion barrier film and “Gating” the system Generation 4 demonstrates substantial increases in target detection range and resolution, particularly at extremely low light levels.
The use of film less technology and auto-gated power supply in 4th generation image intensifiers result in:
- Up to 100% improvement in photo response
- Superb performance in extremely low light level (better S/N and EBI)
- At least triple high light level resolution (a minimum of 36 lp/mm compared to 12 lp/mm)
Export of night vision equipment and optical sighting equipment is controlled by the U.S. Department of State Office of Defense Trade Controls, in accordance with International Traffic in Arms (ITAR), Title 22, Code of Federal Regulations Part 120-130 and/or the Export Administration Regulations (EAR) U.S. Department of Commerce.
It is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction.
Armasight CO-Mini Day/Night Vision Clip On Rifle-scope, Soft Carrying Case, Lithium Battery, Lens Tissue, Warranty Card, Instruction Manual, Battery Adapter, Quick Release Mount, AWReC Advanced Wireless Remote Control, Picatinny Adapter for AWReC, Light Suppressor, XLR-IR850 Detachable Infrared Illuminator
Dimensions & Specifications
We stand behind all the products we sell, and your satisfaction is our top priority. If you're not satisfied with the quality of your purchase, simply send the item back to us in its original packaging within 30 days of its delivery.
Default manufacturer warranty.
Return & Exchange Policy
At our site, returns are easy! You may return new, unused, and resalable items for a refund or exchange. Simply ensure that the item is returned in its original product packaging within 30 days of delivery.